Home



   
 

FD32 straight elements lend themselves to use as span exposed to bending stress, cantilevered up to 4m; they may also be used for decorative purpose. Combined with FD34, they possess a broad range of applications. The FD32 Serie is suitable for hanging rigs in horizontal and vertical way. Made with the fast connection system and tested according to the Din 4113/VBG 70 specifications by the TuV.

  

  • Tolerance free connection with conical connector
  • High Stability aluminium alloy 
  • Compatible with FD34
  • Optimum manufacturing quality
  • TuV Tested
  • Available in any non-standard length and shape

Donwloads

  • Document Icon certificate_fd32.pdf

   
  FD33 straight elements lend themselves to use as span exposed to bending stress, resistant span suitable for bracing widths of up to 12m at medium loads. These truss may also be employed as vertical supports. Combined with FD34, they possess a broad range of applications. These elements allow constructions in up to three levels, thus permitting almost limitless possibilities for the technical realization of creative ideas. Made with the fast connection system and tested according to the Din 4113/VBG 70 specifications by the TuV.  

  • Tolerance free connection with conical connector 
  • High Stability aluminium alloy 
  • Compatible with FD34 
  • Optimum manufacturing quality 
  • TuV Tested
  • Available in any non-standard length and shape

Donwloads

  • Document Icon certificate_fd33.pdf

   
  FD34 straight elements lend themselves to use as span exposed to bending stress resistant span or as tower elements. Very suitable for bracing widths up to 12 m (16 m at reduced loads) at medium loads. Permitting almost limitless possibilities for the technical realization of creative ideas. Made with the fast connection system and tested according to the Din 4113/VBG 70 specifications by the TuV.  

  • Tolerance free connection with conical connector 
  • High Stability aluminium alloy 
  • Optimum manufacturing quality 
  • TuV Tested 
  • Available in any non-standard length and shape

Donwloads

  • Document Icon certificate_fd34.pdf

   
 

The ST System meets the demand for a truss with a high load bearing capacity that lends itself to safe outdoor use, even at a free span of up to 24m at high load. Due to the square profile geometry and the complete diagonal bracing, the GD Truss exhibits the same rigidity in vertical and in horizontal direction and can thus be used for huge spans in Rock ‘n Roll Productions as support as well as Pre-Rigg. The 4mm wall thickness reduces transportation damage and guarantees extreme durability. The universal cornerblock creates flexibility in making various shapes and structures.

  

  • Tolerance free connection with conical connector
  • High Stability aluminium alloy
  • Excellent load-bearing capacity combined with low dead weight
  • 4mm Wall thickness of the main tube
  • Optimum dimensioning of all components 
  • Optimum manufacturing quality 
  • TuV Tested 
  • High wear resistance

Donwloads

  • Document Icon certificate_st.pdf

   
 

The ground support tower FD34 makes for an excellent vertical truss that allows the safe, quick lifting regularly loaded horizontal truss constructions (riggs) and small to medium-sized platform roofs to their service height. The straight elements of the tower consist of FD34 Standard Truss, allowing a variety of combinations.

  

  • This system is compatible with the type FD34 Basement (Touring, Professional and Small Base), Hinge Section, Sleeveblock and the Top Section. 
  • Depending on the area of application, several different sleeveblocks are available making it possible to incorporate several different systems.
  • Two different top sections are supplied for manual or electrical chain hoist. Three different designed basements guarantee optimum stability. 
  • In terms of statics, ground support towers, in indoor applications, are exposed to negligible flexural strain but primarily to pressure strain. 
  • In outdoor use, on the other hand, the tower is exposed to very high flexural strain due to the coverings or roof.

Donwloads


   
 

The TD35 Tower makes for an excellent vertical truss that allows the safe, quick lifting, regularly loaded horizontal ST Truss Rig and ST Roofs to their service height.

  

  • A new multifunctional top part for use of manual chain hoist as well as motorized hoist has been redesigned and built stronger.
  • TD35 Tower Truss is a square 35cm heavy duty truss with one on side integrated horizontal bracing for safe and easy climbing. 
  • A strong, safe and cost effective solution to erect the TD35 Tower. The hinge sets are 100mm long. Those half connectors with a hinge fork allow a very high vertical load. 4 Hinge sets (2 left and 2 right) are required per tower. 
  • A standard sized ST Corner Block with usage of 2 bolted sleeve plates guarantees a perfect and standard geometric ST rig. This block makes it possible to fit the ST Truss to all four sides by using bolted ST receivers.

Donwloads


Designed by Philipstudios